Bostik Simson MSR Construction Adhesive is a single component, permanently elastic, fast cure construction adhesive, based on Silyl Modified Polymer (SMP) and has been developed for bonding and sealing applications in the yacht and boat building industry.
MSR Construction Adhesive has been tested and certified to the International Maritime Organisation (IMO) Fire Test Procedures for Surface Flammability, resolution A.653 (16) and has been approved for use in wall, ceiling and floor applications.
Bonding / Sealings in marine applications, where adhesion and deformability have to comply to extreme requirements. including but not limited to:
Bonding push borders.
Bonding and sealing deck fittings.
Bonding deck coverings.
Bonding and sealing deck / hull connections.
Bonding deck hatches, portholes and bollards.
As bedding compound whenever a higher initial strength is required.
Solvent- and isocyanate free.
Very good UV-resistance and ageing properties; long time resistance against fresh and salt water.
Good adhesion on commonly used materials without the use of a primer.
Neutral, odourless and fast curing.
Can be sanded after curing.
MED Certified by Bureau Veritas: IMO Resolution A.653.
Service temperature between -40°C and +100°C.
Application temperature between 5°C and 35°C.
Skin formation time 10 minutes at 20°C 50% relative humidity.
This product was added to our catalog on Monday 26 July, 2021.