Tensorgrip L31 is suitable for bonding HPL and fabrics to a variety of substrates including MDF, chipboard, plywood and many other timber sheet materials. Tensorgrip L31 is designed for permanent bonding of materials where immediate bond strength and high heat resistance are required. Tensorgrip L31 can also be used for bonding sheet metals, where surface preparation is very important - surface must be degreased and lightly abraded with fine abrasive or non-woven material and is suitable for many postforming applications using most types of postforming equipment.
Fast Drying, flash off 3-5 minutes
Open time 10 minutes
Good Heat Resistance
High Solids
Portable System
Suitable for Post-forming
Easy Application Control
High Performance Neoprene-based Resin System
Gun & Hose Set
Kick Off Kit 5 - Mist Spray
LIMITATIONS
NOT RECOMMENDED for use with plasticised vinyls, flexible plastics, expanded/extruded polystyrene, PE or PP. ALWAYS test Tensorgrip L31 to determine suitability for your particular application prior to use in production.
ALSO AVAILABLE IN LARGE 85KG / 110L CANISTER TO TRADE CUSTOMERS
Technical Datasheet
Safety Datasheet
Need help selecting the right Tensorgrip product?This product was added to our catalog on Wednesday 20 May, 2015.
