Tensorgrip L20 is non-chlorinated adhesive suitable for general laminate work and thick substrate bonding.
Tensorgrip L20 is suitable for bonding HPL, hard plastics, GRP, foams and fabrics to a variety of substrates including MDF, chipboard, plywood and many other timber sheet materials. It is designed for permanent bonding of materials where immediate bond strength, water resistance and high heat resistance are required.
L20 can also be used for bonding sheet metals, where surface preparation is very important – surface must be degreased and lightly abraded with fine abrasive or non-woven material.
Fast Drying - 2-3 minutes flash off
Open time up to 60 minutes
Good Heat Resistance
Very High Solids
Easy Application Control
Gun & Hose Set
Kick Off Kit 6 - Web Spray
NOT RECOMMENDED for use with plasticised vinyls, flexible plastics, expanded/extruded polystyrene, PE or PP.
Need help selecting the right Tensorgrip product?
This product was added to our catalog on Tuesday 20 July, 2021.