|
The following is a non exhaustive list of adhesives and sealants used in the engineering industry. Please feel free to contact us for advice on specific applications.
|
|
|
|
Cyanoacrylates
|
|
|
Three grades of superglue. Low, medium and high viscosity.
|
|
|
200ml Aerosol activator for use with Tradelock Superglues. Also available in 100ml pump bottle.
|
Tradelock Mitre Kit |
50ml of either Tradelock HV or MV superglue (Mitre Fix) and 100ml pump bottle of accelerator (Mitre Accel).
|
|
|
Very low viscosity superglue for bonding difficult rubbers. Provides excellent bonds on insensitive surfaces. Gives excellent bonds to polypropylene and polyethylene when used with NRG Primer.
|
|
|
Surface activator (energiser) for use on low energy surfaces such as polypropylene. Usually used with Tradelock B406. Can achieve substrate breaking bonds on polypropylene and similar substances.
|
Tradelock B480 |
Black, toughened superglue with a very high peel and shock resistance.
|
|
|
Very low bloom superglue for intricate parts including jewellery and electronics. Will not bloom or whiten around the bond area when used in accordance with instructions. B460 also has a very low fume / odour for increased user comfort when up close to the work piece.
|
Tradelock B495 |
Excellent industrial grade instant general purpose superglue.
|
Tradelock B496 |
Superglue for bonding metals.
|
|
Threadlockers
|
|
|
Low strength threadlocker for small intricate parts.
|
Tradelock B243 |
Medium strength threadlocker for parts which need to be removed for maintenance. Tradelock B243 is oil tolerant.
|
Tradelock B270 |
High strength stud lock for more permanent applications.
|
Tradelock B290 |
Wicking grade - Penetrating anaerobic thread sealant for very small parts or for sealing of pre-assembled parts.
|
|
Retainers
|
Tradelock B601 |
High strength retainer for slip and press fit parts. Low viscosity.
|
Tradelock B638 |
High strength retainer with high ultimate dynamic strength for severe locking and retaining applications.
|
Tradelock B641 |
Medium strength retainer for bushes, bearings, keyways, liners and other parts requiring disassembly.
|
Tradelock B648 |
High temperature retainer. 200°C for positive retention.
|
Tradelock B660 |
High strength; gap filling sealant used to ‘rebuild’ slight wear on keyways, bearing shafts, etc.
|
|
Gaskets and Sealants
|
Tradelock B542 |
Hydraulic and pneumatic pipe sealant for fittings up to 3/4”.
|
Tradelock B574 |
Instant gasket to seal joint faces eliminating conventional gaskets.
|
Tradelock B577 |
Pipe sealant with Teflon. Seals fitting up to 2”.
|
|
Epoxies and Methacrylates
|
|
|
Twin pack, fast setting epoxy resin adhesive. Also available as a slower (std) set.
|
|
|
Twin pack building grade epoxy adhesive for fixing slip bricks, rejoining cut bricks / blocks to form angles, etc.
|
Tradeweld HC140 |
Heat curing single pack epoxy adhesive. Cures at 140°C. Other grades available.
|
|
|
Twin pack methacrylate structural adhesive for bonding metals and plastics. Available as a gun applied, premixed system or in a twin syringe.
|
|
|
Single pack, UV curing adhesive for glass bonding.
|
|
Axiom 100 PM
|
Structural acrylic adhesive from Bostik.
|
|
|
|
