Tensorgrip L31


TensorGrip L31 is suitable for bonding HPL and fabrics to a variety of substrates including MDF, chipboard, plywood and many other timber sheet materials. Tensorgrip L31 is designed for permanent bonding of materials where immediate bond strength and high heat resistance are required. Tensorgrip L31 can also be used for bonding sheet metals, where surface preparation is very important surface must be degreased and lightly abraded with fine abrasive or non-woven material and is suitable for many postforming applications using most types of postforming equipment.

  • Fast Drying
  • Good Heat Resistance
  • High Solids
  • Portable System
  • Suitable for Post-forming
  • Easy Application Control
  • High Performance Neoprene-based Resin System

    LIMITATIONS
    NOT RECOMMENDED for use with plasticised vinyls, flexible plastics, expanded/extruded polystyrene, PE or PP. ALWAYS test Tensorgrip L31 to determine suitability for your particular application prior to use in production.

    Technical Datasheet
    Safety Datasheet

  • Be the first to write a review.  Write a Review.

    This product was added to our catalog on Wednesday 20 May, 2015.



    Secured